ZJD12191 Zanussi Washer Dryer Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ZJD12191 Zanussi Washer Dryer This topic has 2 replies, 2 voices, and was last updated 11 years, 10 months ago by johnnyhoz. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts June 2, 2014 at 3:09 pm #80887 johnnyhozParticipant Hi, the above machine cuts out on the dying cycle, the heater element has a reading of 70 megohms to earth is this enough to give these symptoms? any advice would be appreciated. John June 2, 2014 at 3:40 pm #414739 MartinParticipant Re: ZJD12191 Zanussi Washer Dryer Broken wires to NTC on the bottom condenser hose? And 70 meg ain’t great but wouldn’t necessarily cause these symptoms.(But the obvious easy test would be to temporarily disconnect the earth and see!) June 2, 2014 at 5:20 pm #414740 johnnyhozParticipant Re: ZJD12191 Zanussi Washer Dryer Thanks Martin I’ll check the wires Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In