ZJD12191 Zanussi Washer Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ZJD12191 Zanussi Washer Dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 2, 2014 at 3:09 pm #80887
    johnnyhoz
    Participant

    Hi,
    the above machine cuts out on the dying cycle, the heater element has a reading of 70 megohms to earth is this enough to give these symptoms? any advice would be appreciated.
    John

    June 2, 2014 at 3:40 pm #414739
    Martin
    Participant

    Re: ZJD12191 Zanussi Washer Dryer

    Broken wires to NTC on the bottom condenser hose?

    And 70 meg ain’t great but wouldn’t necessarily cause these symptoms.(But the obvious easy test would be to temporarily disconnect the earth and see!)

    June 2, 2014 at 5:20 pm #414740
    johnnyhoz
    Participant

    Re: ZJD12191 Zanussi Washer Dryer

    Thanks Martin I’ll check the wires

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.