Dplomat APM8703/2 will not go into dry cycle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Dplomat APM8703/2 will not go into dry cycle

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 5, 2014 at 12:07 am #80929
    TELL
    Participant

    S/no 20062820166 / 014103005 01-02
    went to this m/c today, and customer cannot get drier to work, I checked all the components for continuity, all OK, Ie, cut out stat, dry timer, elements, and fan motor, all these have a reading. I found that there is no 240v getting to the drier section at all, everything is dead on the drier side, no broken wires etc.
    anybody got a solution, or had this fault. All comments welcome.
    thanks.
    Tell..

    June 5, 2014 at 6:27 am #414868
    Simon46
    Participant

    Re: Dplomat APM8703/2 will not go into dry cycle

    Push half load button in.
    S.

    June 5, 2014 at 8:12 pm #414869
    TELL
    Participant

    Re: Dplomat APM8703/2 will not go into dry cycle

    Thanks simon, tenant has no instruction book, that could save me some work, passed the message on for her to use 1/2 load button, she said , she would try that on the wash.
    thanks
    TELL..

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.