IGNIS ADL 349 THERMISTOR

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › IGNIS ADL 349 THERMISTOR

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 5, 2014 at 7:45 pm #80941
    Powelly999
    Participant

    Hi all
    Dishwasher threw a wobbly last night and started to continuosly beep when in a cycle. The led flashed with no pattern so I’m asuming it is just a code of 1. Looking at the codes i found it said Thermistor open circuit, I have put a meter on it and got at ambient a reading of 63k ohms but running a hot tap over it it goes down to 36k ohms. Does anyone know if these readings are acceptable or to higher resistance?
    Thanks in advance
    Andy

    June 5, 2014 at 10:37 pm #414903
    kwatt
    Keymaster

    Re: IGNIS ADL 349 THERMISTOR

    If it changes, it’s probably okay so time to count flashes.

    K.

    June 6, 2014 at 5:34 am #414904
    Powelly999
    Participant

    Re: IGNIS ADL 349 THERMISTOR

    Hi
    Thats what i thought when the resistance changed. The led flashes once and that is what led me the thermistor. A bit stumped really???

    Thanks
    Andy

    June 6, 2014 at 8:15 am #414905
    kwatt
    Keymaster

    Re: IGNIS ADL 349 THERMISTOR

    Wiring?

    Remember fault codes are not specific, while there’s common reasons for them to pop up they only offer a “the fault lies somewhere, maybe, roundabout here… perhaps” sort of fault analysis. It isn’t a replacement for good old diagnostic work.

    K.

    June 6, 2014 at 3:26 pm #414906
    Powelly999
    Participant

    Re: IGNIS ADL 349 THERMISTOR

    Just thought 60 odd kohms seemed a high resistance.
    Many thanks for the help
    Andy

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.