- This topic has 5 replies, 3 voices, and was last updated 11 years, 10 months ago by
.
-
Posts
-
I’m after some advice in what to check: Indesit WIB111 will do an initial fill but will not progress to the rest of the cycle. Wash light stays on, no flashing lights at all. It will empty if the programmer is set to the drain position after resetting.
Hopefully a simple fix otherwise it’s going to the tip in a couple of days!
Re: Indesit WIB111 – initial fill then nothing – no error co
Check motor carbon brushes and wiring connections first.
Sent from my iPad using Tapatalk HDRe: Indesit WIB111 – initial fill then nothing – no error co
Hi, wiring all seems OK, brushes also look fine.
It’s on ‘a well known auction site’ now for spares or repair, if no bidders it goes to the dump at the weekend…
Re: Indesit WIB111 – initial fill then nothing – no error co
Andy-C wrote:brushes also look fine.
I won’t be bidding for your machine but instead just betting that the motor brushes are at fault here.
Re: Indesit WIB111 – initial fill then nothing – no error co
Well if it’s the brushes then it will be a bargain for someone 🙂 We needed a working machine quickly so have now bought a replacement.
- You must be logged in to reply to this topic.