Asko W6461 leak

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #81007
    angelofthenorth28
    Participant

    I have 12 yr old Asko W6461 whiich is leaking at the bottom left side.
    Its not the door seal, and I thought it could water inlet splashing out of dispenser so turned down water pressure.Lots of rust visible around dispenser but I cant see where its come from.

    Any help appreciated

    #415071
    admin
    Keymaster

    Re: Asko W6461 leak

    Hi

    Left hand side if I remember correctly is where the pump is.If so them most likely pump assembly.

    Bryan

    #415072
    angelofthenorth28
    Participant

    Re: Asko W6461 leak

    pump assembly rests on bottom of machine, the water is coming from higher up. Ive got bottom front panel off, there has been a lot of rust on internal bottom plate but some of that will have come from door leaking before I fitted new rubbert seal.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.