hotpoint wdl540 washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wdl540 washer dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 15, 2014 at 2:21 pm #81079
    suedehead1
    Participant

    hi, the machine works perfectly but after it finishes a program
    it will not switch on again without disconnecting it from the mains, I have replaced the main arcadia type board from emw twice and its still the same.
    I checked both heaters and motor and wiring and all is ok,
    Amy ideas welcomed.

    June 17, 2014 at 6:18 am #415286
    johnnyj
    Participant

    Re: hotpoint wdl540 washer dryer

    What is the ser no as after 106******* if it has only got 4 wires in the harness from the main pcb to the console module it will have to be changed to a 5 way harness when the module is changed as it will work once then not switch back on part no C00271414, jj

    June 17, 2014 at 7:16 pm #415287
    suedehead1
    Participant

    Re: hotpoint wdl540 washer dryer

    thanks for the info I cant remember if it has 4 or 5 wires I ordered the display pcn from emw to try it.

    June 20, 2014 at 6:50 am #415288
    suedehead1
    Participant

    Re: hotpoint wdl540 washer dryer

    It only has 4 wires I have an old 5 wire cable I will try. I can’t understand this one.

    June 20, 2014 at 7:40 pm #415289
    suedehead1
    Participant

    Re: hotpoint wdl540 washer dryer

    Put the original con and display on swapped the 4 wire cable for a 5 wire cable and the customer says it’s working perfectly.
    Thanks for the assist on this one no way I could have fixed it otherwise 😀

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.