Whirlpool AWG 329

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWG 329

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 24, 2005 at 6:21 pm #8132
    ChrisR
    Participant

    Hi.

    The fault on this machine is no pump action.
    I`ve checked the obvious and even changed the timer.
    I`ve removed the pcb,checked for dry joints and loose cables but everything checks out OK but there is no live to the pump so I presume its the board itself.

    As the boards are very expensive,am I right presuming this or does somebody know different?.

    Thanks again 🙂 .

    Chris.

    February 24, 2005 at 7:11 pm #127002
    Penguin45
    Participant

    Chris,
    It’s that damn SMEG built machine, board faults quite common. If you can post up the board number, Dave Conway can probably find it as a SMEG part, which is definitely cheaper.

    Gen part is 4812 282 18679 + VAT.

    Regards,
    Chris.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.