Beko WM7127s not spinning

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko WM7127s not spinning

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 3, 2014 at 9:35 pm #81320
    jonokmon
    Participant

    Hey first time poster here.

    My Beko WM7127s recently stopped spinning. I have so far replaced the carbon brushes to no avail… Today I noticed some black marks around the dc module. On reading advice on another forum i went about bridging 2 burnt out tracks on the board.I am getting readings on my multi meter to show tracks are complete… Does anybody have any advice on what Ishould do next. I would go straight ahead and replace DC board its just I don;t want to fork out money iI dont have to find out there is anothet problem.
    Is there any way I can check that the motor is working correctly before chaning DCboard. Any help is much appreciated as I have alot of awshing piling up and 2 babies to cloth.

    Thanks
    Jon

    July 3, 2014 at 9:43 pm #416199
    electrofix
    Moderator

    Re: Beko WM7127s not spinning

    if the tracks were blown on the board then other components may be as well. if its the board I think it is mounted at the top right hand side. it has a bridge rectifier (square block with 4 legs) these can be tested with a multi meter. search Google on how to test

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.