Beko WM7127s not spinning

[jonokmon]

Hey first time poster here.

My Beko WM7127s recently stopped spinning. I have so far replaced the carbon brushes to no avail… Today I noticed some black marks around the dc module. On reading advice on another forum i went about bridging 2 burnt out tracks on the board.I am getting readings on my multi meter to show tracks are complete… Does anybody have any advice on what Ishould do next. I would go straight ahead and replace DC board its just I don;t want to fork out money iI dont have to find out there is anothet problem.
Is there any way I can check that the motor is working correctly before chaning DCboard. Any help is much appreciated as I have alot of awshing piling up and 2 babies to cloth.

Thanks
Jon

[electrofix]

Re: Beko WM7127s not spinning

if the tracks were blown on the board then other components may be as well. if its the board I think it is mounted at the top right hand side. it has a bridge rectifier (square block with 4 legs) these can be tested with a multi meter. search Google on how to test

Dave

[Author]

Posts