- This topic has 4 replies, 3 voices, and was last updated 11 years, 9 months ago by
.
-
Posts
-
WVD24460GB/02 washer dryer stops during cycle sometimes with 16 mins but can be 20 mins? have checked heaters, motor etc for earth leakage. Any ideas other than module please? Cheers Cras
Re: WVD24460GB02 stops with random time remaining
16 – 20 into the cycle would be the start of the hearing phase I would say. Is there power going to the heater at that point. ( Tip: A clamp meter would be the perfect tool to check that) 😀
Re: WVD24460GB02 stops with random time remaining
Right this is doing my nut in ,fitted new control board and it stops at 39 mins ,watched it through a couple of washes Fills heats and pumps out and stops with no strange noises and the door is unlocked No power to valves I have also changed thermistors ,mains filter and tried a motor still the same ,no apparent earh leakage from any components any ideas chaps as I am running out of them thanks Cras
Re: WVD24460GB02 stops with random time remaining
Have you checked to see if there are any error codes stored?
- You must be logged in to reply to this topic.