WVD24460GB02 stops with random time remaining

[Cras]

WVD24460GB/02 washer dryer stops during cycle sometimes with 16 mins but can be 20 mins? have checked heaters, motor etc for earth leakage. Any ideas other than module please? Cheers Cras

[Martin]

Re: WVD24460GB02 stops with random time remaining

16 – 20 into the cycle would be the start of the hearing phase I would say. Is there power going to the heater at that point. ( Tip: A clamp meter would be the perfect tool to check that) 😀

[Cras]

Re: WVD24460GB02 stops with random time remaining

Right this is doing my nut in ,fitted new control board and it stops at 39 mins ,watched it through a couple of washes Fills heats and pumps out and stops with no strange noises and the door is unlocked No power to valves I have also changed thermistors ,mains filter and tried a motor still the same ,no apparent earh leakage from any components any ideas chaps as I am running out of them thanks Cras

[nomadPaul]

Re: WVD24460GB02 stops with random time remaining

Have you checked to see if there are any error codes stored?

[Cras]

Re: WVD24460GB02 stops with random time remaining

Thanks for the reply ,no I haven’t could you tell me how to access that Thanks Cras

[Author]

Posts