hotpoint w/dryer bhwd129

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint w/dryer bhwd129

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 10, 2014 at 9:16 pm #81417
    adv
    Participant

    hi fokes this fills washes for about a minute then all lights flash . nothing in pump . spins fine / when put on drain only, pump works for about 3 seconds then stops weird . any clues lads to the problem ?am thinkin pcb :rolls:

    July 11, 2014 at 6:26 am #416533
    Martin
    Participant

    Re: hotpoint w/dryer bhwd129

    adv wrote:hi fokes this fills washes for about a minute then all lights flash.

    What should it be doing next once it’s filled and starts to tumble?………….

    adv wrote:am thinkin pcb :rolls:

    Am isn’t, am is thinkin you is need to check heater first brother! 😉

    July 11, 2014 at 8:45 am #416534
    adv
    Participant

    Re: hotpoint w/dryer bhwd129

    why on spin does the pump not run at all .?tho.?

    July 11, 2014 at 8:51 am #416535
    Martin
    Participant

    Re: hotpoint w/dryer bhwd129

    adv wrote:why on spin does the pump not run at all .?tho.?

    I thought earlier you said it runs for 3 seconds?

    July 11, 2014 at 8:58 am #416536
    adv
    Participant

    Re: hotpoint w/dryer bhwd129

    yeh but 3 seconds aint long enough is it . should be running all time till waters out ?

    July 11, 2014 at 3:27 pm #416537
    johnnyj
    Participant

    Re: hotpoint w/dryer bhwd129

    Plug a thermistor in dryer and try again, and check the dryer element these cause weird faults, also carbons wearing down can upset arcadia modules.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.