hotpoint w/dryer bhwd129

[adv]

hi fokes this fills washes for about a minute then all lights flash . nothing in pump . spins fine / when put on drain only, pump works for about 3 seconds then stops weird . any clues lads to the problem ?am thinkin pcb :rolls:

[Martin]

Re: hotpoint w/dryer bhwd129

adv wrote:hi fokes this fills washes for about a minute then all lights flash.

What should it be doing next once it’s filled and starts to tumble?………….

adv wrote:am thinkin pcb :rolls:

Am isn’t, am is thinkin you is need to check heater first brother! 😉

[adv]

Re: hotpoint w/dryer bhwd129

why on spin does the pump not run at all .?tho.?

[Martin]

Re: hotpoint w/dryer bhwd129

adv wrote:why on spin does the pump not run at all .?tho.?

I thought earlier you said it runs for 3 seconds?

[adv]

Re: hotpoint w/dryer bhwd129

yeh but 3 seconds aint long enough is it . should be running all time till waters out ?

[johnnyj]

Re: hotpoint w/dryer bhwd129

Plug a thermistor in dryer and try again, and check the dryer element these cause weird faults, also carbons wearing down can upset arcadia modules.

[Author]

Posts