- This topic has 1 reply, 1 voice, and was last updated 11 years, 8 months ago by
.
-
Posts
-
I have a Indesit DVG 622WH-UK dishwasher.
The problem I’m having is that about 3/4 through a wash programme (actually roughly 1/2 way through the rinse cycle) the machine stops & the two middle LED’s start flashing.
This happens on all wash programmes.
This is supposed to indicate that the water tap is turned off. However the tap is fully open & the water pressure is ok. Also there is obviously enough water there to run the wash cycle but seemingly not enough to run or complete the rinse cycle.
Also because of this the drying cycle does not start.
Any clues please?Re: Indesit Water Warning?
Right, answered my own question.
Had a service visit & the engineer was a bit baffled after checking a few things on the machine & also his laptop.
He said there was no water circulation within the machine (supply ok). It was just timing out & bringing the water supply lights on.
After consulting his technician he changed the main circulating pump which made no difference.
After consulting his technician again he said he was going to have to order a new air break & turbine plus a water solenoid valve as backup & arrange a further visit.
The second engineer came today & fitted the new air break & turbine, he said the solenoid valve would not be needed, they either work or not. Obviously mine was.
Anyway after fitting said air break/turbine the machine worked perfectly! Everything was much quicker, spray arms kicking in/detergent door opening etc.
- You must be logged in to reply to this topic.