Siemens SIWAMAT 6102 Error Code 2

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Siemens SIWAMAT 6102 Error Code 2

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 26, 2005 at 5:16 pm #8159
    Sati
    Participant

    The problem started last week when we were getting error code 3. I checked the sump pump by removing the cover and cleaned it out. It still came up with code 3 so I removed the hose from the sump pump to the vessel at the back along with the drain hose and cleaned them all out. (Unbelievable gunge inside). Now it washes but stops at the rinse cycle with code 2. If we stop it and then start at spin it continues ok and drains ok.
    Only codes 1, 3 and 8 are in the booklet.
    Any idea what it could be and what error code 2 is?

    Sati

    February 26, 2005 at 11:24 pm #127080
    gegsy
    Participant

    Re: Siemens SIWAMAT 6102 Error Code 2

    Hi
    Please supply model number off rating plate usually around door.

    Enr or Fnr and FD

    Thanks

    Greg

    February 27, 2005 at 10:03 am #127081
    Sati
    Participant

    Re: Siemens SIWAMAT 6102 Error Code 2

    The Enr number is WE61020GB/01
    The fd number is FD 76065 00042

    February 27, 2005 at 10:28 am #127082
    gegsy
    Participant

    Re: Siemens SIWAMAT 6102 Error Code 2

    Hi
    Error code 2 is a heating fault.
    If you going to check heater (app 30 ohms) always pull the plug :plug:
    Also with the age of appliance its not uncommon to have the empty pump intermittently jamming causing error 3 :plug: again.


    Regards

    Greg

    April 29, 2006 at 5:19 pm #127083
    Sati
    Participant

    Re: Siemens SIWAMAT 6102 Error Code 2

    Got a new heating element and changed it. Worked fine after that. Very easy to do as well.

    Thanks for advice.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.