Siemens Dishwasher SN65E000GB/17 Flashing fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens Dishwasher SN65E000GB/17 Flashing fault

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • August 16, 2014 at 8:53 pm #81876
    grooster
    Participant

    Hi,
    I’ve been out to a customer today who has a Siemens Integrated dishwasher SN65E000GB/17. Its the new version of the machine. It starts the programme, empties for 30 seconds, then fills with water for a while and then starts to empty while beeping. It then sounds as though it is filling and emptying at the same time if you left it. If you open the door the brush symbol is flashing.
    I fit a pump to this machine a few months ago, and have checked for blockages etc but its not that. Most of these machines that I have seen over the last couple of years are always pump or door lock faults but i’m just a bit stuck on this. It does drain fine but just faults when its filling.
    I’m not too sure if its a filling fault but if somebody could shed any light on this fault for me it would really be appreciated.

    Cheers

    Nick

    August 17, 2014 at 8:16 am #417977
    Martin
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    Try replacing the reed switch in the metering tank.

    August 17, 2014 at 7:33 pm #417978
    grooster
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    Thanks for that Martin. Is that what the flashing brush symbol signifies. The reed switch can be swapped separately from the metering tank can it, unlike the Wpool machines of past.
    I’ve also heard about an optical water lens, does this particular model have one of these?
    Do you have a part number, nothing come up on a quick search on connect, masterpart and Qualtex.

    Does anybody have a manual for me to look through for this dishwasher, would really be helpful to get to know it.

    Many thanks

    August 18, 2014 at 8:16 am #417979
    Martin
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    Go direct to the Siemens spare parts website to see the part you need.


    http://www.siemens-home.co.uk/store/spareparts/search

    August 18, 2014 at 8:49 am #417980
    timdowning
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    The reed switch / pcb just unclips from the plastic unit. You normally get a sheet with it showing you how to do it. No need to remove any plastic bits!

    August 19, 2014 at 7:44 am #417981
    grooster
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    Thanks guys, many thanks. Does anybody have the fault codes for this machine by the way.

    August 19, 2014 at 8:10 am #417982
    Martin
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    grooster wrote:Thanks guys, many thanks. Does anybody have the fault codes for this machine by the way.

    Listed under ‘Bosch SMS series codes’ in known error codes thread. 😉

    August 21, 2014 at 11:46 am #417983
    grooster
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    The SMS has error codes of E:01 thru E:28 but my dishwasher doesn’t have a led display.
    Does it go by the number of times the brush light flashes then, it didn’t look like any noticeable sequence to me. Just a steady on/off all the time.

    August 21, 2014 at 11:53 am #417984
    Martin
    Participant

    Re: Siemens Dishwasher SN65E000GB/17 Flashing fault

    Yes the brush (wash) icon is an error code.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.