Beko Wmb81445lw fills at end of spin cycle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko Wmb81445lw fills at end of spin cycle

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 27, 2014 at 11:06 am #81988
    colly
    Participant

    Dear all

    I have looked at the above machine and observed machine would fill at the end of spin cycle.

    Beko WMB71445LW

    I have changed the board and did a spin test hooray it worked,pt number 2827682050.

    When the customer done her first wash, she found the fault had reappeared.

    If you select spin only,it does now fill at the end of spinning .

    Any ideas?

    Colly

    August 27, 2014 at 11:50 am #418353
    electrofix
    Moderator

    Re: Beko Wmb81445lw fills at end of spin cycle

    had same fault on another Beko auto ended up fault was machine was connected to hot water not cold

    Dave

    just had another thought. i am assuming my machine was sensing it was hot at the end and trying to cool things down by adding water. So, if the ntc was faulty it may do the same thing

    August 27, 2014 at 2:28 pm #418354
    colly
    Participant

    Re: Beko Wmb81445lw fills at end of spin cycle

    Dave

    I will check this out

    Thanks for your swift reply.

    Colin

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.