Whirlpool/CDA Dishwashers with Askoll Circulating Pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool/CDA Dishwashers with Askoll Circulating Pump

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 1, 2005 at 9:26 am #8202
    roly16
    Participant

    Does any Whirlpool person [or anyone else ] have a solution to the problem of poor water circulation on these machines? The water circulates but the pressure doesn’t seem to be high enough to turn the spray arms. Changing the pump doesn’t help. I’ve not found any blockages. Is it that the pump just isn’t up to the job or am I missing something?
    Thanks,
    Geoff

    March 1, 2005 at 1:54 pm #127449
    mbdas
    Participant

    Re: Whirlpool/CDA Dishwashers with Askoll Circulating Pump

    HI I GOT ONE DOING THE SAME SYMPTON BUT HAVE FOUND THAT THE PLASTIC FUNNEL ON THE INSIDE OF THE DW KEEPS BLOWING OFF AND THE COVER WHICH HOLDS IT DOWN WAS BROKEN
    HOPR THIS HELPS


    MARK

    March 1, 2005 at 9:21 pm #127450
    admin
    Keymaster

    Re: Whirlpool/CDA Dishwashers with Askoll Circulating Pump

    hi,

    There are two problems with these…
    1) the upper spray arm supply tube pops out of the filter base due to poor fit.
    2) the upper basket docking station is also a poor fit.

    These both give poor cleaning in the top basket. The circ pumps are ok regards pressure.

    Either fix of the top basket supply problem is likely to happen again as you are replacing like for like and not modified parts.

    Kevin

    March 1, 2005 at 10:41 pm #127451
    roly16
    Participant

    Re: Whirlpool/CDA Dishwashers with Askoll Circulating Pump

    Thanks v much guys for that information. Will follow it up.
    Geoff

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.