- This topic has 9 replies, 3 voices, and was last updated 11 years, 7 months ago by
.
-
Posts
-
hi the dishwasher seems to run ok but sticks with 1 minute to go.
its not the one with the clear tube which gets blocked. it has a thin metal plate on the base. heater ok wiring ok pcb looks ok.
any ideas welcomed.Re: bosch sgs45c02gb/11 dishwasher
1 min to go indicates a ‘time out’ for whatever reason. Fill, Drain or Heating? The three most likely areas to check out.
Re: bosch sgs45c02gb/11 dishwasher
suedehead1 wrote:I hate dishwashers thanks for the reply.
But once you gain ‘the knowledge’ you will just love them and will be straining your leash to get at ’em. 😉
Re: bosch sgs45c02gb/11 dishwasher
dont think i will get the knowledge on this one it filled emptied and heated.
does it know its filled could be flow meter, does it know its emptied or heated could be pcb.
It looks like its heading for landfill. it will take too much time trying flow meter or pcb then the dreaded phone call “its still not working”.Re: bosch sgs45c02gb/11 dishwasher
Worth trying impellor jug before it’s binned
Sent from my iPad using Tapatalk HDRe: bosch sgs45c02gb/11 dishwasher
That model is in fact the easiest to fix. Simple access underneath. Both the Impellor jug and PCB are cheap (the PCB rarely fails on these anyway) I’d say the heater the most likely suspect in this case.
This may go landfill but if you get chance to check out another then they are no problem. It’s the latest plastic base models that are BIG trouble, believe me! 🙁
Re: bosch sgs45c02gb/11 dishwasher
Agree with Martin. Had to replace heater assembly on the later model and complete base had to come off. Nightmare
Re: bosch sgs45c02gb/11 dishwasher
agree plastic base is a nightmare i am going to change pcb and impellor jug
- You must be logged in to reply to this topic.