belling X0U594 heating problem

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › belling X0U594 heating problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 19, 2014 at 5:07 pm #82282
    ddirect
    Participant

    Hi All
    been to a belling built under double oven today.
    X0U594
    444445031
    ser 80300649

    main oven gets to temperature thermostat neon goes off, oven then cools a long way down before the thermostat switches back on and the neon returns.in a nutshell it is not maintaining the correct temperature.
    noticed main oven lamp unit was well burnt out so disconnected it
    put in new stat and you guessed it the same problem.
    neon is wired to the fan overrun pcb via a link from the stat could that be the problem. or does the main oven lamp still need to be in the circuit.
    thanks.
    Darren

    September 19, 2014 at 10:25 pm #419406
    electrofix
    Moderator

    Re: belling X0U594 heating problem

    looks like a stoves built oven so it should have a large black fan at the rear
    does this fan start and keep running after you turn oven off

    if no prob the power supply cap on the pcb done lots of them

    Dave

    September 20, 2014 at 1:21 pm #419407
    ddirect
    Participant

    Re: belling X0U594 heating problem

    thanks Dave ill check that out. cant remember hearing it running.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.