AEG 16830 Door issue

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG 16830 Door issue

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 27, 2014 at 7:46 pm #82393
    dragonfire709
    Participant

    Our trusty AEG has just developed an issue that has me stumped-hopefully you guys can help. The door suddenly stopped locking, so wouldn’t start any program. It would occasionally show code E40, but not consistently. I instantly thought this would be caused by the interlock, so bought a replacement. When I went to fit the replacement i noticed some burn marks on the interlock connector. I replaced the interlock anyway, but as suspected this didn’t fix the issue.

    Could this be the end for our poor old Lavamat?

    Cheers

    Roy

    September 27, 2014 at 9:08 pm #419711
    Martin
    Participant

    Re: AEG 16830 Door issue

    Did you not sort out the burnt connector block then?

    September 27, 2014 at 9:23 pm #419712
    dragonfire709
    Participant

    Re: AEG 16830 Door issue

    Hi Martin. I did clean up all the connections but am still trying to source a replacement block or loom. My main concern was that the connection looked burnt out and whether that was a symptom of bigger issues.

    Cheers

    Roy

    September 28, 2014 at 6:59 am #419713
    Martin
    Participant

    Re: AEG 16830 Door issue

    No bigger issues just a poor contact that can be sorted with a new connector. Give me the full product number (PNC) of your appliance and I can look up the part number of the new lead if you like.

    September 28, 2014 at 6:17 pm #419714
    dragonfire709
    Participant

    Re: AEG 16830 Door issue

    Hi Martin

    Thanks for your help. The PNC is 914602122/01.

    Cheers

    Roy

    September 28, 2014 at 6:35 pm #419715
    Martin
    Participant

    Re: AEG 16830 Door issue

    The part number of the wiring harness to connect the door interlock is 1322416122

    September 28, 2014 at 6:57 pm #419716
    dragonfire709
    Participant

    Re: AEG 16830 Door issue

    That’s great. Thanks Martin will have a look for it now.

    October 2, 2014 at 12:22 pm #419717
    dragonfire709
    Participant

    Re: AEG 16830 Door issue

    Many thanks for your help, Martin. I finished fitting the loom last night, fired it up and it’s all sorted.

    Cheers

    Roy

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.