hotpoint tdl 10

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › hotpoint tdl 10

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 4, 2005 at 1:34 pm #8271
    milo
    Participant

    hi, noise problem with my tumble tryer.
    it appears that the front end of the drum is loose and rubbing against the front support chassis. i found what looks like a “belt” brokken. i think this may be a “guide” for the front end of the drum.
    could you comment!

    regards
    milo

    March 4, 2005 at 1:47 pm #127766
    Martin
    Participant

    Re: hotpoint tdl 10

    Milo,

    Yes it will be the front drum support and drum bearers that have worn away. The part you found looking like a belt is in fact the felt seal. It is likely your machine will need a replaced Drum Front Air Duct assembly that incorporates the relevant parts as a unit.

    Could be a costly repair though, to be sure, give me the first 2 digits of your machines serial number?

    Martin

    March 4, 2005 at 3:24 pm #127767
    milo
    Participant

    Re: hotpoint tdl 10

    hi,
    serial no 90100199.
    regards
    milo
    ps thanks 4 quick reply.

    March 4, 2005 at 3:56 pm #127768
    Martin
    Participant

    Re: hotpoint tdl 10

    Milo,

    Probably not good news then 😥

    I reckon it needs close inspection (dismantling) to be sure. At the very least you will need 3 of 1701674 Bearing Pads & a 1701676 Felt seal. But usually when they get in the state you discribe then the front metal plate wears too badly in order to replace these bits. 🙁

    As a consequence you will need a new Front Drum & Duct Kit (Part No 1702495) to fix it but sadly that part is expensive and in my opinion uneconomical to consider 🙄

    Martin

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.