Whirlpool AWZ612 E13 fault ode

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWZ612 E13 fault ode

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 12, 2014 at 8:12 pm #83011
    ChrisR
    Participant

    hi guys.

    Changed a door seal on this machine then started a test sequance.

    It started to fill then started to flash E13 and pumped out.

    Door lock appeared ok but then started playing up.

    Have fitted new lock which now works ok but E13 still in display.

    Any suggestions?.

    Thanks.

    Chris.

    November 14, 2014 at 4:25 pm #421448
    Grendal
    Participant

    Re: Whirlpool AWZ612 E13 fault ode

    Could do with the 85 number as there are a few different machines with that model.
    If it is the smeg built washer dryer then it will be low insulation on the dryer element

    November 14, 2014 at 6:42 pm #421449
    ChrisR
    Participant

    Re: Whirlpool AWZ612 E13 fault ode

    Hi
    It is a Smeg built machine.
    I’ve disconnected the drier heater but the fault remains.
    Thanks
    Chris

    November 15, 2014 at 12:07 pm #421450
    Grendal
    Participant

    Re: Whirlpool AWZ612 E13 fault ode

    Have you checked for low insulation on the motor or wash heater

    November 15, 2014 at 1:25 pm #421451
    ChrisR
    Participant

    Re: Whirlpool AWZ612 E13 fault ode

    To be honest no.

    Previous to changing the door seal,this machine worked ok.

    I’ve double and treble checked everything that was removed in changing door seal and all seems well.
    I’ll go back and check insulation readings but it’s seems to me I’ve left something off but I can’t find anything.
    Thanks for your help.
    Chris

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.