- This topic has 3 replies, 2 voices, and was last updated 11 years, 4 months ago by
.
-
Posts
-
Hi Guys
The anti flood is continuously running on this dishwasher but there is no water in the base (and never has been).
Am I missing something obvious here or is it circuit board trouble.Re: Neff S54E53X1GB/86 Dishwasher
there is a sensor section on the left that gets full of goo and blocks and causes the same problem
go here http://www.neff-eshop.com/eshop/neff/gb … earch1.htm
enter your Enr
on diagram 4 its item 0420
you will prob find the float is stuck up keeping pump on
if so clean it and all will be ok
Dave
Re: Neff S54E53X1GB/86 Dishwasher
Hi Dave
Thanks for the quick reply.
It was gunked up but the float was sat at the bottom. There is nothing pushing against the button on the micro switch.
Could it be anything to do with the impellor flow meter?Re: Neff S54E53X1GB/86 Dishwasher
no flow meter only works on fill
things get more complicated from here
on the main board all small components are switched by a device called a triac. they are used in lamp dimmers and the like to switch mains components from low voltage chips. these can go short and can be changed if you can solder
take it you have checked the microswitch does workDave
- You must be logged in to reply to this topic.