Prima LPR721 Washer Dryer not Spinning

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Prima LPR721 Washer Dryer not Spinning

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 18, 2014 at 1:42 pm #83066
    spiderpig
    Participant

    The drum on this E/Lux (pn 91467411000) based machine only seems to turn one direction for 1 second bursts, any thoughts/ideas on this guys?

    November 18, 2014 at 10:55 pm #421633
    aqualectric
    Participant

    Re: Prima LPR721 Washer Dryer not Spinning

    If the timer gets to spin, the water has drained fully and the drum spins up and stops that is normal. The drum will spin up 3 times and stop; then finally it levels out at balance speed ready to spin – then it should ramp up to spin OK.

    If it spins up and stops 3 times and then the timer aborts to ‘End’; then the timer unit is faulty. EMW do replacement VS80 and 81 units. You will need the timer numbers off the side label and the rear of the top circuit board to order. Also check the tacho on the rear of the motor just in case the mag has unscrewed and pushed the coil off. And of course, the brushes.

    For reference, a Prima LPR721 is a Zanussi in fancy dress, so all parts are basic Zanussi. No great issues there.

    HTH,

    Steve.

    November 20, 2014 at 9:54 am #421634
    spiderpig
    Participant

    Re: Prima LPR721 Washer Dryer not Spinning

    Cheers Aqualectric, have spoken to EMW they reckon it is deffo the timer. Need to go back and get the 6 digit 513/514 number, however they have offered to fix original timer if they don’t have one.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.