Bosch WVD24520GB F18 on drying cycle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WVD24520GB F18 on drying cycle

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 30, 2014 at 10:47 am #83227
    Bernie
    Participant

    Bosch WVD24520GB F18 on drying cycle
    I am going to this machine tomorrow (Monday) the customer tells me he has checked that the pump/ filter is clean and the impeller turns freely. This only happens on the drying cycle, would I be right that the condenser is blocked and has to be cleaned?
    If so how difficult is it to get to and get it off?
    Thanks for any help or advise
    Bernie

    December 1, 2014 at 2:42 pm #422124
    Bernie
    Participant

    Re: Bosch WVD24520GB F18 on drying cycle

    Just been to this machine and the condenser does not appear blocked to be blocked pump runs ok on both wash and drying. I think it is more electrical as at first was trying it on the low heat 15mins after 3/4 mins got F18 when I tried it on high heat 1 hour it worked for 10 mins before I stopped it tried it on the low heat for 1 hour and that worked ok before I stopped it. Once you get F18 it does not matter which drying cycle you select f18 come up straight away

    Anyone with any ideas
    Thanks
    Bernie

    December 1, 2014 at 6:18 pm #422125
    Andy jones
    Participant

    Re: Bosch WVD24520GB F18 on drying cycle

    If my memory serves right I had the same problem and replaced valve and was fine after

    December 1, 2014 at 8:40 pm #422126
    Bernie
    Participant

    Re: Bosch WVD24520GB F18 on drying cycle

    Thanks for the reply, I guess you mean the dryer water valve?

    Thanks again
    Bernie

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.