diplomat dishwasher ADP 8332

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › diplomat dishwasher ADP 8332

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 8, 2005 at 5:12 pm #8348
    CARO67
    Participant

    Please can any one help me. Ihave resentlymoved into a new house and my dishwasher keeps showing up a F1 fault, does any one know what this means and how do i rectify it.

    March 8, 2005 at 5:17 pm #128072
    DentedPorsche
    Participant

    Re: diplomat dishwasher ADP 8332

    Hiya,
    F1 is an NTC problem.
    DP

    March 8, 2005 at 5:23 pm #128073
    CARO67
    Participant

    Re: diplomat dishwasher ADP 8332

    Thanks dentedporshe but what does NTC mean

    March 8, 2005 at 7:48 pm #128074
    DentedPorsche
    Participant

    Re: diplomat dishwasher ADP 8332

    Hiya,
    An NTC is a negative temperature coefficient thermistor.
    The fault code on your machine indicates that there is a problem in this area of your machine. Fault codes are only a likely indication of the problem and I’d recommend an engineer check out the machine as you could end up throwing parts at it trying to cure the fault.
    Hope this is of some help.
    DP

    March 9, 2005 at 8:44 am #128075
    admin
    Keymaster

    THanks DP,
    Do you know of any Engineers in the Liverpool area that can fix this problem. I have had 1 person out and he didnt seem to know what he was doing and charged me £15 for a 2 minute job and pressing some of the buttons. The problem is intermitent and it so happened it worked when he tried it now I am back to were I started.

    March 31, 2005 at 5:01 pm #128076
    admin
    Keymaster

    Re: diplomat dishwasher ADP 8332

    trying to buy a new or used display pcb B004701LS ANY IDEAS?

    March 31, 2005 at 7:42 pm #128077
    kwatt
    Keymaster

    Hi,

    What model is it for, without a model number we’ll not be able to help you. 😕

    K.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.