Beko Tumble Dryer : DCU8230 : No Pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko Tumble Dryer : DCU8230 : No Pump

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 5, 2015 at 1:23 pm #83613
    neilsukwg
    Participant

    Voltage to pump is 30 volts

    should be 240

    can only be pcb or am i missing something?

    January 5, 2015 at 3:54 pm #423266
    Seamy
    Participant

    Re: Beko Tumble Dryer : DCU8230 : No Pump

    Trace cable back from pump to board, check output there to see if you get correct voltage, check float switch and loom is all I can advise.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.