Hotpoint WMD960 not rotating

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WMD960 not rotating

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 5, 2015 at 10:56 pm #83623
    Lracholland
    Participant

    Hi,

    I have a hotpoint WMD960 washing machine that isn’t rotating. The belt is in good condition, no brushes to worry about (3 phase motor) and the waste pipe isn’t blocked.

    When I put the machine on, with or without clothes in the drum, the cycle starts, water enters the machine, the clock begins to count down – everything as normal, except the drum doesn’t rotate. When the cycle reaches the end, (i.e. 1 minute to go) it will not finish, nor unlock the door. No fault codes are shown on the display.

    Any help/advice thankfully received,

    Carl

    January 6, 2015 at 9:10 am #423284
    iadom
    Moderator

    Re: Hotpoint WMD960 not rotating

    The motor needs testing with a megger or suitable multimeter, also all the wiring harness and connections need inspecting for breaks or bad contacts.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.