BOSCH WFO2467GB/15 DIAGNOSTICS

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries BOSCH WFO2467GB/15 DIAGNOSTICS

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #83763
    chichele
    Participant

    Hi
    would be really grateful if someone could tell me how to get into the diagnostics on this to retrieve any error code and test it
    thanks for taking a look Ian

    #423665
    Martin
    Participant

    Re: BOSCH WFO2467GB/15 DIAGNOSTICS

    In the absence of such information (hunting for the Yetti in the foothills of the Himalayas much easier to achieve) may I enquire as to what the fault symptoms are?

    #423666
    chichele
    Participant

    Re: BOSCH WFO2467GB/15 DIAGNOSTICS

    Hi Martin
    On the wash cycle the appliance will not complete the cycle, it continues to wash and wash with 1 on display .
    If stopped it will do a rinse or spin and complete those cycles.
    Insulation has been checked and the motor is just above 10 meg , could this be an issue ? i don’t know how low it should go before it causes problems , we don’t generally do bosch so experience is a bit limited
    Thanks Ian

    #423667
    Martin
    Participant

    Re: BOSCH WFO2467GB/15 DIAGNOSTICS

    The motor insulation is poor and could be a problem. You didn’t mention the heater and that may be where the problem lies? Duff heater, or no feed to it, or module heater relay?

    #423668
    chichele
    Participant

    Re: BOSCH WFO2467GB/15 DIAGNOSTICS

    Yeah , thanks Martin , wash heater is solid and it does heat ,so motor is looking suspect

    #423669
    Martin
    Participant

    Re: BOSCH WFO2467GB/15 DIAGNOSTICS

    A tired and sticky pump rotor can also cause time-out (I.e 1min left on display). Likewise restricted drain system. Strip and clean motor to rid carbon dust should vastly improve megger reading anyway.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.