Hoover Optima oph714d – v.v. noisy spin

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover Optima oph714d – v.v. noisy spin

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 26, 2015 at 6:34 pm #83877
    fieldm
    Participant

    Hi after reading all the information on your site re: problems with washing machines I am assuming my problem relates to the drum bearings, have taken off the back of the machine and when turn drum manually it is noisy. Just checking whether it is possible to replace the bearings etc. after reading that some machines have sealed units. If it is repairable could you let me know if the drum can be removed from back of machine or does it have to come through the top. Once I know I can give your spares department a ring and order everything I need. Thanks

    January 26, 2015 at 7:06 pm #424086
    Martin
    Participant

    Hoover Optima oph714d – v.v. noisy spin

    It’s for the skip. Drum is sealed and a replacement over 250 quid.

    January 26, 2015 at 8:29 pm #424087
    admin
    Keymaster

    Re: Hoover Optima oph714d – v.v. noisy spin

    Hi

    If its under 5 years old its £119.75 fully repaired 5-8 yrs then £129.00 fully repaired

    Bryan

    January 26, 2015 at 10:48 pm #424088
    fieldm
    Participant

    Re: Hoover Optima oph714d – v.v. noisy spin

    Thanks for your replies, either way probably not worth repairing even if only cost 129.00 think i would rather put that towards a new washer, good to know about the sealed unit though I’ll double check which machine is the easiset to mend before I buy next one. Thanks.

    January 27, 2015 at 8:16 am #424089
    Martin
    Participant

    Re: Hoover Optima oph714d – v.v. noisy spin

    fieldm wrote: Thanks.

    That’s OK, just put it on the pile over there with the rest of them…… 😉

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.