BEKO DSC85W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO DSC85W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 30, 2015 at 2:41 pm #83923
    dolphin appliance care ltd
    Participant

    Hi,

    appliance was tripping electrics – engineer found main pcb had a burn mark on it, element etc meters out ok & no earth fault on machine.

    Engineer ordered main pcb, appliance no longer trips, but wont wont work when power goes on no lights work, there are no signs of life – until you open the door and the interior light comes on (and off when door closes)

    Is this a faulty board, or is there a programming option available?

    Thanks
    Alister

    January 30, 2015 at 8:31 pm #424212
    Seamy
    Participant

    Re: BEKO DSC85W

    Heater is likely faulty, get the Engineer to megger it checking the NTC, they normally go low to earth & take out components on P.C.B.
    No programming necessary!

    The heaters have new better quality NTCs on them now.
    New type heater 2970101200
    New P.C.B number 2963282703

    February 3, 2015 at 12:55 pm #424213
    dolphin appliance care ltd
    Participant

    Re: BEKO DSC85W

    That’s great, will give those a try!

    Thank you,
    Alister

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.