Hotpoint Condenser Drier

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hotpoint Condenser Drier

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 5, 2015 at 5:01 pm #83990
    bazofstour
    Participant

    Have a Hotpoint Condenser Drier and have had the panels off, as the motor just hums and doesn’t turn the drum.

    Model is:- Hotpoint TDC32P Ser.No.24104761

    Is it possible to change the motor, and where Could I buy a replacement from?

    Are they difficult to change?As it seems to be attached to a plastic housing and has a long shaft which also drives the heater fan.Have a substantial tool-kit but are any special tools required?
    Many thanks for any help. 8)

    February 5, 2015 at 5:06 pm #424445
    Andy jones
    Participant

    Re: Hotpoint Condenser Drier

    Change the motor capacitor

    February 5, 2015 at 5:27 pm #424446
    bazofstour
    Participant

    Re: Hotpoint Condenser Drier

    That seems an easy fix.Are you sure?

    February 5, 2015 at 5:48 pm #424447
    Andy jones
    Participant

    Re: Hotpoint Condenser Drier

    Very common fault and worth a go

    February 6, 2015 at 8:47 am #424448
    bazofstour
    Participant

    Re: Hotpoint Condenser Drier

    Do you stock this item, or could you point me in the direction please?

    February 6, 2015 at 8:59 am #424449
    iadom
    Moderator

    Re: Hotpoint Condenser Drier

    Look on the side of the capacitor for its rating, it will be either uF7 or uF8. Or less common uF7.5.

    Then go HERE

    February 6, 2015 at 2:10 pm #424450
    bazofstour
    Participant

    Re: Hotpoint Condenser Drier

    Many thanks, it’s a 7mF capacitor.

    February 6, 2015 at 6:48 pm #424451
    Andy jones
    Participant

    Re: Hotpoint Condenser Drier

    Sorry I didn’t reply been busy as said easy to get hold of

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.