Bosch WET2820GB/13 stops mid cycle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WET2820GB/13 stops mid cycle

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 17, 2015 at 11:09 am #84125
    Twoten
    Participant

    The above Bosch washer/dryer has an intermittent fault where it stops during the cycle.

    It stops during the wash and rinse.
    The lights stay on as they were at the point of the cycle.
    It stops with water in it also when empty.
    If you switch the power off then back on it will continue through the cycle but could stop again.
    There is no earth fault.

    Has anyone come across this before?

    February 20, 2015 at 9:44 am #424791
    Kentish
    Participant

    Re: Bosch WET2820GB/13 stops mid cycle

    Have had the pressure switch cause odd sticking on these machines, usually at high level just as it switches the water off.Not a cheap part for what is an old machine now. Also seen the main PCB cause this.

    February 20, 2015 at 11:42 am #424792
    Twoten
    Participant

    Re: Bosch WET2820GB/13 stops mid cycle

    I had considered the pressure switch but disregarded it as the machine continued after turning off then back on, would you agree with this or do you think it still a possibility?
    If not it looks like the PCB.

    February 20, 2015 at 5:49 pm #424793
    Kentish
    Participant

    Re: Bosch WET2820GB/13 stops mid cycle

    I would be more inclined to the pressure switch if you can turn the machine off then back on. However I am not App Care, but have you tried going into diagnostic to see the last recorded fault?

    February 20, 2015 at 11:44 pm #424794
    Twoten
    Participant

    Re: Bosch WET2820GB/13 stops mid cycle

    How do I get into the diagnostics/last fault code on this machine?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.