Neff Hood D8900N0GB/01

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Neff Hood D8900N0GB/01

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 20, 2015 at 2:20 pm #84162
    B J Morris
    Participant

    Switched lights on and bulb blew out of screw! Nothing works now. Didn’t trip out, fuse seems ok, control unit? Terminal box? Switch element?

    February 21, 2015 at 6:30 pm #424852
    electrofix
    Moderator

    Re: Neff Hood D8900N0GB/01

    if the fuse in the plug is 13amp then you have probably blown a hole in the printed circuit board

    it is common for kitchen fitters to leave the 13A fuse in the plug or spur box and ignor the manual which asks for 3 or 5A

    Dave

    February 22, 2015 at 11:35 am #424853
    B J Morris
    Participant

    Re: Neff Hood D8900N0GB/01

    Thanks Dave. Is the PCB in the terminal box next to the fan?

    February 22, 2015 at 9:43 pm #424854
    electrofix
    Moderator

    Re: Neff Hood D8900N0GB/01

    dont know on this unit. some are controlled by electronics some by simple switches
    if it simple switches then track blow in there. if its a seperate board then look there

    Dave

    February 23, 2015 at 11:30 pm #424855
    B J Morris
    Participant

    Re: Neff Hood D8900N0GB/01

    Will do. Thanks Dave.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.