Spin Cycle Leaves Clothes Wet

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Spin Cycle Leaves Clothes Wet

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 24, 2015 at 12:08 pm #84196
    macman35
    Participant

    Bosch Maxx WFL 2450GB: when used on normal programmes (usually 40C Easy Care) the spin cycles leaves washing very wet. I have to run a separate spin cycle to get it acceptably dry.
    Machine has had a new pump, door seal and motor brushes in the last five years. I have checked the pump filter and drain hose; no visible obstructions.
    I’d guessing that the tub is not draining fast enough to allow the spin speed to reach maximum (I’m ruling out a motor or belt issue, since the spin speed seems OK when run as a separate cycle with no drain-out required?
    What else could this be? Pressure switch fault or pressure system blockage maybe? Pump beginning to fail? Imbalance limiter fault?
    I should add that the fault is intermittent at present, I’d say it happens 2 times out of 3-but the 3rd time the washing is spun sufficently.

    February 24, 2015 at 3:02 pm #424994
    Martin
    Participant

    Re: Spin Cycle Leaves Clothes Wet

    Easy care only spins to 800rpm.

    February 24, 2015 at 5:45 pm #424995
    macman35
    Participant

    Re: Spin Cycle Leaves Clothes Wet

    But I’ve used the machine many times on that programme without this issue. It’s not specific to any one programme.

    February 24, 2015 at 6:17 pm #424996
    Martin
    Participant

    Re: Spin Cycle Leaves Clothes Wet

    Sock stuck in the sump hose? Pump knackered (lateral play in impellor)? Motor arcing?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.