Miele “AUTOMATIC DOOR OPENING FAULT”

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Miele “AUTOMATIC DOOR OPENING FAULT”

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 25, 2015 at 6:35 pm #84220
    Stealth
    Participant

    Hi,

    I have a Miele Dishwasher Model G2833 SCi , displaying an “AUTOMATIC DOOR OPENING FAULT”

    After the last wash the door automatically opened. After emptying it I closed the door but it would not automatically ratchet back to the closed position and displays “Automatic Door Opening Fault”. I switched the power off for a few minutes before trying again with no luck.

    When I switch the power on from the wall switch it looks like the door moves a couple of millimeters. The door and the ratchet push doesn’t seem like its jammed.

    Any ideas?

    New lock or possible control board faulT?

    Any help would be appreciated.

    Thanks

    February 26, 2015 at 12:13 am #425098
    electrofix
    Moderator

    Re: Miele "AUTOMATIC DOOR OPENING FAULT"

    would strip and have a close look at the lock

    any fault with miele that needs parts is expensive. just rang for an oulet hose and got a quote over £50 so a door lock aint going to be cheap

    Dave

    February 26, 2015 at 10:50 am #425099
    Stealth
    Participant

    Re: Miele "AUTOMATIC DOOR OPENING FAULT"

    For those interested. I split the door in two to get to the micro switch on the door release catch (Mine is an integrated dishwasher with decor door). I checked the microswitch with a meter and all checked out ok.

    Looking deeper I traced the fault to the ‘door ratchet push’ by replacing it with a used one that I luckily picked up as a spare along while ago.

    The part number for this part was 06715062 now superseded to 06715063 they call it a Electro-Mechanical Lock current Miele price is £132.50 + vat and £6.00 delivery. Part is also held in stock.

    I have also attached to this post a pdf of the circuit diagram that I found in the door FYI. (sorry its not a great image I had to compress it due to the forum limit of 256kb

    Regards

    Steve 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.