Miele “AUTOMATIC DOOR OPENING FAULT”

[Stealth]

Hi,

I have a Miele Dishwasher Model G2833 SCi , displaying an “AUTOMATIC DOOR OPENING FAULT”

After the last wash the door automatically opened. After emptying it I closed the door but it would not automatically ratchet back to the closed position and displays “Automatic Door Opening Fault”. I switched the power off for a few minutes before trying again with no luck.

When I switch the power on from the wall switch it looks like the door moves a couple of millimeters. The door and the ratchet push doesn’t seem like its jammed.

Any ideas?

New lock or possible control board faulT?

Any help would be appreciated.

Thanks

[electrofix]

Re: Miele "AUTOMATIC DOOR OPENING FAULT"

would strip and have a close look at the lock

any fault with miele that needs parts is expensive. just rang for an oulet hose and got a quote over £50 so a door lock aint going to be cheap

Dave

[Stealth]

Re: Miele "AUTOMATIC DOOR OPENING FAULT"

For those interested. I split the door in two to get to the micro switch on the door release catch (Mine is an integrated dishwasher with decor door). I checked the microswitch with a meter and all checked out ok.

Looking deeper I traced the fault to the ‘door ratchet push’ by replacing it with a used one that I luckily picked up as a spare along while ago.

The part number for this part was 06715062 now superseded to 06715063 they call it a Electro-Mechanical Lock current Miele price is £132.50 + vat and £6.00 delivery. Part is also held in stock.

I have also attached to this post a pdf of the circuit diagram that I found in the door FYI. (sorry its not a great image I had to compress it due to the forum limit of 256kb

Regards

Steve 😀

[Author]

Posts