- This topic has 6 replies, 2 voices, and was last updated 10 years, 11 months ago by
.
-
Posts
-
hi guys any advice here , checked motor , i dont know what values are supposed to be but i get continuity between some of the wires , 220 coming to power board and light working from on/off pcb input but no motor working when buttons are pressed hence no power to motor , could this be input buttons on pcb ? even though the lights are working when the other button is pressed
Re: de deitrich cooker extractor hood motor not working
on most hoods there is common wire normally a neutral that will have an internal fuse in case of overheat
you should get a reading from any wire to any wire but one wire (common) will give a higher resistance
Dave
Re: de deitrich cooker extractor hood motor not working
yes sorry
the motor will have 4 or so wires. 1 common and to get the speed they switch to one of the others. my guess is the common one is open circuit
Dave
Re: de deitrich cooker extractor hood motor not working
Hi Dave, motor wires check out, no loss of continuity between any of them , I will order a switch pcb to see if that sorts it
- You must be logged in to reply to this topic.