Indesit IWDC6105UK washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IWDC6105UK washer dryer

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • May 7, 2015 at 12:00 pm #84885
    aroffauz
    Participant

    Symthoms
    The machne will fill and wash no problem
    When set to drain or spin the drain pump will run for 1 second only – no further voltage to the drain pump
    I have changed the module and the same result

    Would any one be able to advise me on this
    Many thanks
    Declan 😀

    May 7, 2015 at 1:06 pm #427079
    timdowning
    Participant

    Re: Indesit IWDC6105UK washer dryer

    Did you check the dryer probe(ntc) / wiring?

    May 7, 2015 at 8:38 pm #427080
    aroffauz
    Participant

    Re: Indesit IWDC6105UK washer dryer

    Hi Tim – thanks for your advice
    I checked the continuity of the wiring from the dryer probe ntc to the module – all intact and reads correctly
    I connected the ntc dryer wiring to another spare dryer unit
    unfortunately the problem still persists

    Thanks Declan 🙂

    May 7, 2015 at 9:11 pm #427081
    HotDog
    Participant

    Re: Indesit IWDC6105UK washer dryer

    new style p/switch are causing problems

    May 8, 2015 at 5:52 am #427082
    aroffauz
    Participant

    Re: Indesit IWDC6105UK washer dryer

    Thanks Hotgog
    I swapped out the pressure switch with another , unfortunately the problem still persists ( pumps for about 1 second and then nothing)
    This is good to know about the presure switches for the future
    I appreciatte your advice
    Thanks Declan 😀

    May 8, 2015 at 3:51 pm #427083
    HotDog
    Participant

    Re: Indesit IWDC6105UK washer dryer

    just thought if you change main board you sometimes have to change console mod wiring if you only have 4 cable harness at the console it needs to be converted to a 5 cable harness

    May 8, 2015 at 5:22 pm #427084
    aroffauz
    Participant

    Re: Indesit IWDC6105UK washer dryer

    Thanks Hotdogs..I initially thought that might be the problem, I went back to read the technical notes re the 5 wire harness to the console.. My machine is the later model with 5 wires.thanks for your help Declan 🙂

    May 8, 2015 at 8:25 pm #427085
    HotDog
    Participant

    Re: Indesit IWDC6105UK washer dryer

    might be worth trying wash ntc

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.