Whirlpool 2 door fridge /freezer

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Whirlpool 2 door fridge /freezer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 11, 2015 at 1:33 am #84931
    tjmuk71
    Participant

    This is model S21W2D, also very similar to S26S5DF
    The problem with this unit is the intermittent flashing of the display and clicking of a relay on the PCB. I noticed elsewhere in another forum that this can be associated with faulty caps. on the pcb and I am quite capable of fixing this, however I cannot see how to get access to the PCB
    as can find no way to remove the plastic surround of the front panel.
    Would appreciate any help.

    Thanks

    May 11, 2015 at 11:07 pm #427189
    simon26r
    Participant

    Re: Whirlpool 2 door fridge /freezer

    Not sure on this model but if its like the latest lg machines thw whole thing os molded into the door. Havd to fit a new door what was crazy. These things are ment to be earth friendly. Sometimes you can access from inside if your lucky

    May 12, 2015 at 7:15 am #427190
    johnmac11
    Participant

    Re: Whirlpool 2 door fridge /freezer

    This looks the same as the UK models so I would imagine that to remove the panel you have to:

    Pull the drip tray off
    remove the 2 screws on the control panel below where the drip tray was.
    pull panel out from the bottom an inch or so
    push panel up to free the lugs at the top

    HTH

    John

    September 13, 2017 at 12:34 am #427191
    Diggy
    Participant

    Re: Whirlpool 2 door fridge /freezer

    Did this issue get resolved as I have same issue was going to replace main circuit board.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.