Blanco Extractor Hood – Lights not working

Home › Forums › Public Support Forums › Help And Support › Other Appliances › Blanco Extractor Hood – Lights not working

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 26, 2015 at 12:52 pm #85065
    vidmarc
    Participant

    Any suggestions? The bulbs look OK but figure I should try replacing them.

    What voltage should I be looking for? There’s a circuit diagram that says 2 x 20 Watts max but doesn’t list the voltage.

    May 26, 2015 at 1:13 pm #427588
    don
    Moderator

    Re: Blanco Extractor Hood – Lights not working

    Hi

    Model number is always good so we know what to look for 😉

    If they are like the attached then they are G4 20W halogen capsules. Avoid touching the glass with your fingers as the natural oils from your skin creates a hot spot and the lamp will blow. If you have a multimeter a quick continuity test will tell you if they are okay.


    HTH 🙂

    Don

    May 26, 2015 at 2:30 pm #427589
    vidmarc
    Participant

    Re: Blanco Extractor Hood – Lights not working

    The model number is BE/C/1029/S

    The bulbs look fine. Sure they haven’t blown so my guess is it’s the switching unit/circuit board at the front that’s the problem.

    May 26, 2015 at 2:33 pm #427590
    kwatt
    Keymaster

    Re: Blanco Extractor Hood – Lights not working

    We have never managed to source Blanco spare parts, no idea who does them or if you can even get them I’m afraid. 🙁

    K.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.