wm63p door seal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › wm63p door seal

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • July 1, 2015 at 1:58 pm #85412
    tash
    Participant

    hi just ordered a door seal for a wm63p 75193795.. but it has a different lip to the original .. c00200958.. hotpoint say its the only one and no alternative ..the lip sticks up as against being flat.. any ideas?
    thanks


    Sent from my iPhone using Tapatalk

    July 1, 2015 at 6:30 pm #428567
    suedehead1
    Participant

    Re: wm63p door seal

    if its the one with the groove in it change the clamp band

    July 1, 2015 at 7:04 pm #428568
    iadom
    Moderator

    Re: wm63p door seal

    The same part number as the 1603006, bog standard WM seal. The seal lip was thickened up on later seals to prevent dribbles but TBH I have never had a problem fitting them?

    July 1, 2015 at 10:49 pm #428569
    tash
    Participant

    Re: wm63p door seal


    Sent from my iPhone using Tapatalk

    July 1, 2015 at 10:54 pm #428570
    tash
    Participant

    Re: wm63p door seal


    Sent from my iPhone using Tapatalk

    July 1, 2015 at 10:55 pm #428571
    tash
    Participant

    Re: wm63p door seal

    not sure if you can see inner lip on photos


    Sent from my iPhone using Tapatalk

    July 2, 2015 at 7:25 am #428572
    suedehead1
    Participant

    Re: wm63p door seal

    its a different seal turn the old one upside down.

    July 2, 2015 at 9:05 am #428573
    iadom
    Moderator

    Re: wm63p door seal

    The one on the left is identical to 5 or 6 1603006 seals I have. ???

    They did experiment with a different seal like the old one and a stainless steel rim that fitted loosely to the drum front in an attempt to stop clothes passing the seal, I have just discarded the stainless steel ring and fitted a 1603006, cannot rememeber having any problems. 😕

    July 2, 2015 at 11:02 am #428574
    Andy jones
    Participant

    Re: wm63p door seal

    Yea can’t see a problem. They’ve been that way for ages

    July 2, 2015 at 1:32 pm #428575
    tash
    Participant

    Re: wm63p door seal

    ok cheers


    Sent from my iPhone using Tapatalk

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.