Zanussi door seal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Zanussi door seal

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • July 10, 2015 at 8:14 am #85490
    iadom
    Moderator

    Does anyone know of an alternative part number for a 1327756118 Zan door seal, not recognised on Masterpart web site and can’t find it in the store here. 🙁

    TIA.

    Jim.

    July 10, 2015 at 8:20 am #428712
    kwatt
    Keymaster

    Re: Zanussi door seal

    Changes to…

    http://shop.ukwhitegoods.co.uk/37926990 … -door-seal

    K.

    July 10, 2015 at 9:22 am #428713
    iadom
    Moderator

    Re: Zanussi door seal

    Ta. 🙂

    Hmm, not been out to it but customer said it was just a washer not a washer dryer?

    July 10, 2015 at 9:40 am #428714
    iadom
    Moderator

    Re: Zanussi door seal

    PNC is 914906231…ZWG7160P which is just a washer?

    July 10, 2015 at 10:10 am #428715
    kwatt
    Keymaster

    Re: Zanussi door seal

    It is for a washer, stupid titles weren’t changed for some reason (Dave ;)).

    K.

    July 10, 2015 at 10:41 am #428716
    iadom
    Moderator

    Re: Zanussi door seal

    😀

    July 11, 2015 at 1:07 pm #428717
    jess1ca
    Participant

    Hi Iadom
    The part number for da door boot is DST37992699005 in stock Qualtex

    July 11, 2015 at 1:17 pm #428718
    iadom
    Moderator

    Re: Zanussi door seal

    Thanks, all sorted now. 🙂

    July 14, 2015 at 6:29 pm #428719
    iadom
    Moderator

    Re: Zanussi door seal

    Well the 3792699005 seal has just arrived and it is a washer/dryer seal????

    July 14, 2015 at 7:50 pm #428720
    bazza500
    Participant

    Re: Zanussi door seal

    Hi Jim, are you sure it’s a washer dryer door seal.

    This washer has a seal fed by a plastic funnel type thing from the drawer to the seal the same shape as a washer dryer air inlet.

    July 14, 2015 at 8:17 pm #428721
    jess1ca
    Participant

    Re: Zanussi door seal

    Hey Just checked on Electrolux website and this looks like its one of the chinese manufactured machines they were sourcing for a short time and bazza500 is right it got this wierdo funnel thingy and the part number is correct at DST1327756118 not available on the Qualtex or Connect l think the best answer on this one is to give Distri a ring 01325 302 464

    July 14, 2015 at 9:10 pm #428722
    iadom
    Moderator

    Re: Zanussi door seal

    Not been out to it yet, it could well be an inlet, possibly similar to the seals on the last British made Hoover washers.

    July 14, 2015 at 9:18 pm #428723
    bazza500
    Participant

    Re: Zanussi door seal

    Yep, that’s right. They are similar to the Hoover new wave range.

    July 14, 2015 at 10:12 pm #428724
    kwatt
    Keymaster

    Re: Zanussi door seal

    I checked it on the PNC Jim. If that’s right, the seal is right.

    If it’s wrong and the PNC is correct, Distri is wrong. If so, that’s a first for me.

    K.

    July 15, 2015 at 1:36 pm #428725
    iadom
    Moderator

    Re: Zanussi door seal

    It was the correct seal, large water inlet vent at top, not Chinese though.Ffirst one of these I have done, usual rip at the bottom due to trapping clothing in door. :rolls:


    Not too bad to do as the front panel comes off quite easily, a bit difficult to get the new seal back on, definitely need a smear of washing up liquid as the concrete weight is very close.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.