wanted… Pcb aeg f35080vi

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › wanted… Pcb aeg f35080vi

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 11, 2015 at 8:35 am #85783
    admin
    Keymaster

    Aeg f35080vi Pnc 91123536800

    Hi
    anyone got kicking around in there scrap pile? I need a 2nd hand pcb for this dishwasher as long as on off switch works on the board that’s all I need off it, got a machine with this fault
    and just need the switch off the board,

    Thanks
    canufixit

    August 15, 2015 at 3:59 pm #429529
    electrofix
    Moderator

    Re: wanted… Pcb aeg f35080vi

    had a few with this fault but not gat any scrap boards at the mo

    had a bit of sucess by taking apart the switches and re-grooving the latch mech inside. the plastic grooves wear with switching on and off so the latch wire goes down the wrong path

    Dave

    August 15, 2015 at 9:29 pm #429530
    admin
    Keymaster

    Re: wanted… Pcb aeg f35080vi

    ok , thanks for that i might have a go at that then? , will up date you

    canufixit

    September 5, 2015 at 5:18 pm #429531
    admin
    Keymaster

    Re: wanted… Pcb aeg f35080vi

    well had a go at the switch but no joy, but I see what you mean
    about the switch ended up with a new pcb being fitted

    canufixit

    September 5, 2015 at 6:00 pm #429532
    electrofix
    Moderator

    Re: wanted… Pcb aeg f35080vi

    was worth a try but it one of those problems

    if the customer turn it off all the time the switch goes and you have to replace the pcb
    if the customer leaves it on the pcb burns out (or goes on fire) and you still have to replace the pcb

    Dave

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.