Samsung Rsh5sbbp1 compressor won’t run

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung Rsh5sbbp1 compressor won’t run

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 9, 2015 at 11:59 am #86049
    mbdas
    Participant

    Hi I’ve been to this today and can’t get the compressor run I’ve got no power to it , No fault code comes up in the display , no earth faults so I think it’s the pcb but there are two and one with a flashing led any one got any ideas .
    Thanks Mark

    September 14, 2015 at 10:42 am #430158
    Lawrence
    Participant

    Re: Samsung Rsh5sbbp1 compressor won’t run

    look on the inside of the pcb cover there is a chart that tells you what the flashing LED means

    September 15, 2015 at 10:44 am #430159
    mbdas
    Participant

    Re: Samsung Rsh5sbbp1 compressor won’t run

    Hi I’ve looked under the lid and circuit boards but no information sheet anywhere that would have been to easy, the led flashers once followed by a pause then repeats any ideas . Thanks Mark

    September 15, 2015 at 10:59 am #430160
    SAMURI
    Participant

    Re: Samsung Rsh5sbbp1 compressor won’t run

    Starting Failure.

    1 Check the compressor terminals for short. ( U,V,W )

    2 Check IPM Pins short of Inverter PBA

    3 Check IPM operating voltage ( under DC 13.5V )

    4 Other cases, check the compressor cycle.

    Above is the Samsung list of faults for 1 blink Frequency

    Bob

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.