AEG DISHWASHER NO HEAT

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #86114
    bruce118
    Participant

    AEG dishwasher F88020VI. PROD NO 911934605/06
    The above dishwasher seems to heat the first time you try it then will not heat any time after that. I intially checked the heater OK. then replace the control board.
    This made no difference. Have since changed the heater and connections, the Ntc also.
    Checked the wiring and the pressure switch. Found no other faults. No earth faults either. I am now scratching my head, has anybody had this fault ?
    Thanks. Bruce

    #430327
    DASLTD
    Participant

    Re: AEG DISHWASHER NO HEAT

    Hi Bruce , if you let me have your email address ill send you the service manual with test programme.

    Simon

    #430328
    bzz67
    Participant

    Re: AEG DISHWASHER NO HEAT

    Hi
    Did you ever get to the bottom of this problem? We have a very similar problem with one in our workshop right now and its starting to drive us mad.
    Thanks

    #430329
    Criscold
    Participant

    Re: AEG DISHWASHER NO HEAT

    Do you get any fault codes on this or have you been into diagnostics ?

    #430330
    bzz67
    Participant

    Re: AEG DISHWASHER NO HEAT

    i have got into what i think is the diagnostics and got 13 flashes of the end of cycle light. The model is FAVORIT40010VI pnc:911935627
    Its a intermittent heat problem and its getting the better of us at the moment. Everything checked out ok so we replaced the pcb, even wiring, but still no good.
    Any help/ ideas would be good (If not, I’ll try the hammer on it)

    #430331
    Criscold
    Participant

    Re: AEG DISHWASHER NO HEAT

    You have mail

    #430332
    bzz67
    Participant

    Re: AEG DISHWASHER NO HEAT

    Info@clarkeselectrical.com

    #430333
    smartin
    Participant

    Re: AEG DISHWASHER NO HEAT

    i had one which turned out to be a sticking pressure switch.

    #430334
    grooster
    Participant

    Re: AEG DISHWASHER NO HEAT

    I’ve had this problem in the past with the Electrolux group dishwashers two or three times now, not sure if its the identical model or not, but it turns out to be the motor not running fast enough. It sounds fast enough. Somebody on here warned me about it and true enough it worked.

    #430335
    bzz67
    Participant

    Re: AEG DISHWASHER NO HEAT

    Thanks for all your help and input on this, but grooster wins the prize…..circulating motor sorted it. If only it wasn’t the last thing we tried. But in our defence, it did seem to be running ok and up to speed. So how would you diagnose that on a intermittent heat fault?
    Anyway, UKWG saves the day. Thanks again

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.