Beko WDA91440W Washer Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WDA91440W Washer Dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 27, 2015 at 4:42 pm #86216
    stevebunyan
    Participant

    Has any one come across this fault before?
    At the end of the wash cycle it displays the message “waiting to cool down” and doesn’t release power to the door lock. This cooling down Process can take up to 12 hours +.

    September 27, 2015 at 6:08 pm #430568
    iadom
    Moderator

    Re: Beko WDA91440W Washer Dryer

    Moved to correct forum. 😉

    October 14, 2015 at 4:27 pm #430569
    stevebunyan
    Participant

    Re: Beko WDA91440W Washer Dryer

    Any one?

    October 14, 2015 at 7:39 pm #430570
    timdowning
    Participant

    Re: Beko WDA91440W Washer Dryer

    The manual only says;
    • Loading door of the machine may not be opened due to safety reasons. >>> If “wait to cool down to open….”
    warning is displayed, machine will keep the loading door locked for your safety until it cools down. You can accelerate
    cooling by running any 10-minute drying programme.

    Has the air intake filter been cleaned?

    October 15, 2015 at 8:12 am #430571
    Seamy
    Participant

    Re: Beko WDA91440W Washer Dryer

    Presume if its not still hot that there may be a sensor issue giving info’ that it is still hot and preventing door from opening, just a thought.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.