Curry’s Essentials (CDW60W13) filling & emptying

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Curry’s Essentials (CDW60W13) filling & emptying

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 25, 2015 at 7:23 pm #86486
    aqua_serve
    Participant

    Guys,

    I’m hoping one of you might be able to point me in the right direction regarding this machine.

    I changed the heater element on the machine as it had blown, I tested the dishwasher with the bottom off and everything was working. After replacing the bottom panel the machine now fills and empties continually. I’ve found a ‘service sheet’ on here which was pretty poor. Parts seem none existent too. Any advice as to what to look for on this machine would be greatly appreciated.

    Yours,

    Mark

    October 28, 2015 at 9:11 am #431885
    electrofix
    Moderator

    Re: Curry’s Essentials (CDW60W13) filling & emptying

    if you now remove the botton panel does it work properly again ?

    Dave

    November 3, 2015 at 11:10 pm #431886
    gandh1
    Participant

    Re: Curry’s Essentials (CDW60W13) filling & emptying

    if the aquastop isnt pushed up in the base, check the side air chamber matrix, as im presuming you would have laid it on its back, so due to the crap design water can get sometimes get stuck in there and make it think its overfilled/do weird and wonderful things.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.